17
En
*4
When you connect your personal computer to PC IN and select the corresponding input selector, the video of the personal computer
is output from the HDMI outputs. However, if you have assigned the HDMI inputs to the same input selector, the AV receiver will
output signals received from the HDMI inputs instead of signals from PC IN. To have the signals output from PC IN, select
“-----” for the corresponding input selector in the “HDMI Input” setting (➔ page 40).
• With connection D, you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2 as well, use D and
G.)
• With connection G, you can listen to and record audio from external components while you are in Zone 2.
• With connection
G, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
connect to the main stereo.
■ How to record a video source
With the connections described above, you cannot record the videos through the AV receiver. See “Recording” about
connections for video recording (➔ page 38).
To Next Page
Loading...
