35
En
Note
*1
When the input source contains the encoded front high channel, the corresponding speakers output the sound.
*2
If there are no surround back speakers, Dolby Pro Logic II is used.
*3
For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
*4
AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better
sound according to the player. In that case, set the output setting on the player side to PCM.
*5
If there are no surround back speakers, DTS is used.
• The listening modes cannot be selected with some source formats.
Neo:6 This mode expands any 2-channel source for up to 7.1-channel playback. It
uses seven full-bandwidth channels of matrix decoding for matrix-encoded
material, providing a very natural and seamless surround sound experience
that fully envelops the listener.
•Neo:6 Cinema
Use this mode with any stereo movie (e.g., TV, DVD, VHS).
•Neo:6 Music
Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
VHS, DVD).
SXCN
•Neo:6
This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel
playback.
DV
Listening Mode Description Input
Source
Speaker
Layout
Neo 6:Neo 6 C i nema:
Neo 6 Music:
Neo 6:
To Next Page
Loading...
