Onkyo RDV-1

14
RDV-1 US/Asia 29342995
VIDEOS VIDEO
VIDEO OUTPUT
CENTER
SURR FRONT CH
1CH
2
SUBWOOFER
COMPONENT
YP
B PR
RS 232 MULTI CHANNEL OUTPUT
ANALOG OUTPUT
CH 1
CH
2
R
L
AC INLET
COAXIAL COAXIAL
OPTICAL
OPTICAL
CH 1
CH 2
VIDEO OUT
COMPONENT
YPB PR
COAXIAL OPTICAL
DIGITAL INPUTDIGITAL OUTPUT
120 V
VOLTAGE SELECTOR
220 -230 V
Making connections from other components
The DVD Player contains a high quality D/A converter which is used when
processing the digital audio signal recorded on DVD media. The DVD Player
can also function exclusively as a D/A converter. This feature lets you
enjoy high quality processing of digital audio signals from other components
in your entertainment system.
Before Connecting
•Refer to the instruction manuals supplied with any and all components that you plan to connect the DVD Player to.
•Be sure to turn off the power to all components to be connected and unplug them from the wall outlet before making any
connections.
•Make sure that analog audio connections are made from the CH1 or CH2 ANALOG OUTPUT jacks on the DVD Player to an amplifier or
receiver as described on pages 12 and 13.
Making digital connections
The DVD Player features an optical and a coaxial
digital input jack. The input is selected according to
the position of the Source input selector on the front
panel, making it possible to make connections to two
different components. The input is selected according
to the position of the Source input selector on the front
panel, making it possible to make connections to a CS
tuner, CD player, DAT recorder, or other devices that
output linear PCM audio signals with sampling rates of
32/44.1/48 kHz. Make connections from the DIGITAL
INPUT OPTICAL jack (DIGITAL 1) on the DVD Player to
the digital optical output on an audio component
using an optical fiber cable (sold separately). Make
connections from the DIGITAL INPUT COAXIAL jack
(DIGITAL 2) on the DVD Player to the digital coaxial
output on an audio component using a coaxial cable
(sold separately).
: Signal flow
Devices that output linear PCM audio
signals with sampling rates of
32/44.1/48 kHz
To digital
audio output
(coaxial)
To digital audio
output (optical)
Coaxial cable
(not supplied)
Optical cable
(not supplied)
RDV-1(US_E)p10-21.p65 10/4/00, 17:0314