Onkyo T-411RDS-409 User Manual

Setting the clock
1 3 2
Setting the clock ^ *
1. Press the CLOCK ADJUST button
twice quickly within a half of second.
2. Use the ◄ TUNING/PRESET ► but¬
tons to adjust the time.
Adjust the time by pressing these but¬
tons. If you hold one of them down
longer than 0.5 seconds, the display
changes quickly. Press the button once
again to stop the display changing.
3. Press the MEMORY button to set the
new time.
The clock starts to work.
You can set the time accurately from
the TV or radio news.
To find out the time while a unit of equip¬
ment is playing, press the CLOCK
ADJUST button. Press the button once
again to return to the original display.
3
_L
! □
O O C ce l 1 ]
c=
1 c
3C
=1
]
/*
_ X.
l
Tuning the radio
Make sure that the input selector on the
amplifier has been set to TUNER.
1. Press the KEY MODE button to
enter TUNING mode.
2. Press the BAND button to select
either FM or AM.
3. Use the ◄ TUNING / PRESET ► but¬
tons to change the frequency.
Place the AM loop antenna or T-shaped
FM antenna on a wall or other surface
in the position which gives the best
reception.

Onkyo T-411RDS-409 Specifications

General

Brand	Onkyo
Model	T-411RDS-409
Category	Tuner
Language	English