Onkyo T T-4555 User Manual

8
Remote Controller
A STANDBY/ON button (15)
Sets the T-4555 to On or Standby.
B Number buttons (16, 23)
Used to select radio presets by number, and to enter
AM/FM station frequencies and DAB channel num-
bers in Direct Tuning mode.
C DIRECT TUNING button (16)
Selects the Direct Tuning mode. With AM and FM,
you can select a station directly by entering its fre-
quency. Direct Tuning mode does not work with
DAB.
D RETURN button (23)
Returns to the previous display.
E Arrow [ ]/[ ]/[ ]/[ ] buttons (20, 21, 23, 24)
With AM and FM, the Up and Down [ ]/[ ] but-
tons are used for tuning. With DAB, the Up and
Down [ ]/[ ] buttons are used to select stations.
The Left and Right [ ]/[ ] buttons are not used by
the C-AMFM and C-DAB tuner boards.
F PRESET [+]/[–] buttons (22)
Used to select radio presets.
G AUTO SCAN button (19, 22)
Scans for DAB stations or FM stations that support
RDS.
H BAND button (15, 19)
Selects AM, FM, or DAB*.
I DISPLAY button (20)
Used to change the information shown on the dis-
play.
J DIMMER button (15)
Adjusts the display brightness.
K ENT and ENTER buttons (20, 21, 23, 24)
Used to confirm various functions and settings.
L SETUP button (20, 23, 24)
Selects Setup mode.
M TUNING/CH [ ]/[ ] buttons (15, 19)
With AM and FM, these buttons are used for tuning.
With DAB, they’re used to select stations.
N TUNING MODE button (15)
Selects the Auto or Manual Tuning mode for AM
and FM radio.
*DAB requires C-DAB tuner board.
Remote Controller
1
2
3
4
9
J
L
6
7
8
5
K
M
N

Onkyo T T-4555 Specifications

General

Brand	Onkyo
Model	T T-4555
Category	Car Receiver
Language	English