Onkyo TX-27 - Specifications; Amplifier Section

Specifications
AMPLIFIER SECTION
Power Output:
Musical Power Output:
Continuous Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Facter:
Frequency Response:
RIAA Deviation:
Sensitivity and Impedance:
Phono Overload:
Signal-to-Noise Ratio:
Tone Controls:
Loudness (—30dB):
Subsonic:
TUNER SECTION
FM:
Tuning Range:
Usable Sensitivity:
50dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Selectivity:
AM Suppression Ratio:
Harmonic Distortion:
Frequency Response:
Stereo Separation:
Tuning Level(Hi/Lo):
Muting Level:
Stereo Threshold (Hi/Lo):
AM:
Tuning Range:
Usable Sensitivity:
_Image Rejection Ratio:
1F Rejection Ratio:
Signal-to-Noise Ratio:
Harmonic Distortion:
GENERAL
Power Supply:
Semiconductors:
Dimensions (WxHxD):
Weight:
TX-37
55 watts per channel, min. RMS, at 8 ohms,
both channels driven, from 20Hz to 20kHz,
with no more than 0.04% THD.
2 x 120 watts at 4 ohms, 1kHz (DIN)
2x77 watts at 8 ohms, 1kHz (DIN)
2x 77 watts at 4 ohms, 1kHz (DIN)
2x 55 watts at 8 ohms, 1kHz (DIN}
0.04% at rated power
0.04% at 1 watt output
0.04% at rated power
0.04% at 1 watt output
35 at 8 ohms
20 — 30,000 Hz +1dB
20 — 20,000 Hz +0.8dB
Phono: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms (phono)
180mV RMS at 1 kHz, 0.04% THD
Phono: 85dB (at 10mV input, A weight-
ed)
76dB (IHF A-202)
CD/Tape: 95dB (A weighted)
80dB (IHF A-202)
Bass:. +10dB at 100Hz
Treble: +10dB at 10kHz
+7 dB at 70 Hz, +5 dB at 10 kHz
—6 dB at 15 Hz
87.5 — 108.0 MHz (50kHz steps)
Mono: 11.2dBf, 1.0uV, 75 ohms
O.9uV (S/N 26dB, 40kHz Devi.)
75 ohms DIN
Stereo: 18.0dBf, 2.2uV, 75 ohms
23uV (S/N 46dB, 40kHz Devi.)
75 ohms DIN
Mono: 18.0dBf, 2.2uV 75 ohms
Stereo: 37.2dBf, 20uV, 75 ohms
1.5dB
85dB
90dB
Mono: 72dB
Stereo: 67dB
50dB DIN (+300kHz, 40kHz dev.)
50dB
Mono: 0.15%
Stereo: 0.25%
30 — 15,000Hz +1.5dB
40cB at 1kHz_
30dB at 100 — 10,000Hz
23.2dBf, 4uV/17.2dBf, 2uV
23.2dBf, 4uV/17.2dBf, 2uV
522 — 1611kHz (QkHz steps)
30nV
40dB
40dB
40dB
0.8%
European models: AC220V, 50Hz
Canadian models: AC120V, 60Hz
U.K, & Australia: AC240V, 50Hz
Worldwide models: AC120V, 60Hz and
AC220V, 50Hz
FETs: 9 TR: 36 ICs: 12
Diodes: 54 LEDs: 36
435 x 112 x 343 mm
17-1/8" x 4-7/16" x 13-1/2”
8.5 kg 18.8 Ibs.
Specifications
and
features
are
subject
to
change
without
notice.
TX-27
40 watts per channel, min. RMS, at 8 ohms,
both channels driven, from 20Hz to 20kHz,
with no more than 0.08% THD,
2 x 85 watts at 4 ohms, 1kHz (DIN)
2 x 55 watts at 8 ohms, 1kHz (DIN)
2 x 55 watts at 4 ohms, 1kHz (DIN)
2 x 40 watts at 8 ohms, 1kHz (DIN)
0.08% at rated power
0.08% at 1 watt output
0.08% at rated power
0.08% at 1 watt output
35 at 8 ohms
20 — 30,000 Hz +1dB
20 — 20,000 Hz +0.8dB
Phone: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms (phono)
180mV RMS at 1 kHz, 0.08% THD
Phono: 85dB (at 10mV input, A weight-
ed) ;
75dB (IHF A-202)
CD/Tape: 95dB (A weighted)
80dB (IHF A-202)
Bass: +10dB at 100Hz
Trebie: +10dB at 10kHz
+7 dB at 70 Hz, +5 dB at 10 kHz
87.5 — 108.0 MHz (50kHz steps)
Mono: 12.8dBf, 1.2uV, 75 ohms
1.0uV (S/N 26dB, 40kHz Devi.)
75 ohms DIN
Stereo: 18.0dBf, 2.2uV, 75 ohms
23uV (S/N 46dB, 40kHz Devi.)
75 ohms DIN
Mono: 18.0dBf, 2.2uV 75 ohms
Stereo: 37.2dBf, 20uV, 75 ohms
1.50B
85dB
90dB
Mono: 7idB
Stereo: 66dB
50dB DIN (+300kHz, 40kHz dev.)
50dB
Mono: 0.15%
Stereo: 0.3%
30 — 15,000Hz +1.5dB
40dB at 1kHz
30dB at 100 — 10,000Hz
17.2dBf, 2uV
17.2dBf, 2uV
522 — 1611kHz (9kHz steps)
30uV
40dB
40dB
40dB
0.8%
European models: AC220V, 50Hz
Canadian models: AC120V, 60Hz
U.K. & Australia: AC240V, 50Hz
Worldwide models: AC120V, 60Hz and
AC220V, 50Hz
FETs: 7 TR: 37 1tCs: 10
Diodes: 54 LEDs: 28
435 x 112 x 343 mm
17-1/8” x 4-7/16" x 13-1/2"
78 kg 17.2 Ibs.