Onkyo TX-7620 - Amplifier Section; Specifications

TX-—7620
SPECIFICATIONS
AMPLIFIER SECTION
Power output:
Musical Power Output:
Continuous Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Frequency Response:
RIAA Diviation:
Sensitivity and Impedance:
Phono Overload (MM):
Signal-to-Noise Ratio:
Tone controls:
Muting
TUNER SECTION
FM:
Tuning Range:
Usable Sensitivity:
5SOdB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Selectivity:
AM suppression Ratio:
Harmonic Distortion:
Frequency Response:
Stereo Separation:
Muting Level:
AM:
Tuning Range:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Harmonic Distortion:
GENERAL
Dimensions (W x H x D):
Weight:
40
watts
per
channel,
min,
RMS,
at
8
ohms,
both
channels
driven,
from
40Hz
to
20kHz,
with
no more than 0.3% total harmonic distortion.
2 xX 95 watts at 4 ohms, 1kHz (DIN)
2 x 68 watts at 8 ohms, 1kHz (DIN)
2 x 50 watts at 4 ohms, 1kHz (DIN)
2 x 45 watts at 8 ohms, 1kHz (DIN)
0.3% at rated power
0.1% at 30 watts output
0.3% at rated power
0.1% at 30 watts output
35 at 8 ohms
20 — 30,000Hz +1dB
20 — 20,000Hz +0.8dB
Phono: 2.5mV/50 kohms
CD: 150mV/50 kohms
Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms
120mV RMS at 1kHz, 0.3% THD.
Phono: 85dB (at 10mV input, A weighted)
75dB (IHF A-202)
CD/Tape: 95dB (A weighted)
80dB (IHF A-202)
Bass: +10dB at 100Hz
Treble: +10dB at 10kHz
— co
87.50 — 108.00MHz (50kHz steps)
Mono: 12.4dBf, 1.2uV, 750hms
1.2uV (S/N 26dB, 40kHz Devi.)
75o0hms DIN
Stereo: 19.2dBf,2.5uV, 750hms
25nV (S/N 46cB, 40kHz Devi.)
75o0hms DIN
Mono: 18.2dBf, 2.2uV, 750hms
Stereo: 38.2dBf, 22uV, 750ohms
1.5dB
85dB
90dB
Mono: 70dB
Stereo: 65dB
50dB DIN (+300kHz, 40kHz dev.)
50dB
Mono: 0.15%
Stereo: 0.30%
30 —15,000Hz +1.5dB
40cB at 1kHz
30dB at 100 — 10,000Hz
17.20Bf, 4uV
522—1611kHz( 9kHz steps)
30unV
40dB
40dB
40dB
0.8%
435 x 115 x 320mm
17-1/8" x 4-1/2" « 12-9/16"
6.7kg., 14.8lbs.