Do you have a question about the Onkyo TX-NR1009 and is the answer not in the manual?
front left/right power output | 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC) |
---|---|
center power output | 180 W (6 Ω, 1 kHz, 1%, 1 channel driven, IEC) |
surround left/right power output | 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC) |
surround back left/right power output | 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC) |
dynamic power | 300 W (3 Ω, Front) |
total harmonic distortion + noise | 0.08% (20 Hz–20 kHz, Half power) |
damping factor | 60 (Front, 1 kHz, 8 Ω) |
input sensitivity and impedance | 200 mV/47 kΩ (Line) |
phono overload | 70 mV (MM, 1 kHz, 0.5%) |
video input sensitivity/output level and impedance | 1.0 Vp–p/75 Ω (Component and S-Video Y) |
---|---|
component video frequency response | 5 Hz–100 MHz/0 dB, -3 dB |
composite input sensitivity/output level and impedance | 1.0 Vp–p/75 Ω (Composite) |
fm tuning frequency range | 87.5 MHz–108 MHz |
---|---|
am tuning frequency range | 522 kHz–1, 611 kHz |
fm/am preset memory | 40 stations |
power supply | AC 220–240 V~, 50/60 Hz |
---|---|
power consumption | 830 W |
dimensions | 435 x 198.5 x 435.5 mm |
weight | 18.5 kg |