Onkyo TX-NR1010 - Page 44

Turning On & Basic Operations
En-44
*1
After enabling the corresponding speakers, press RECEIVER
followed by SP (speaker layout) repeatedly to select the
speakers you want to use: front high, front wide, or surround
back.
*2
After enabling the corresponding speakers, press RECEIVER
followed by SP (speaker layout) repeatedly to select the layout
you want to use. These layouts are only available when
“Preout to External Amplifier” (➔ page 64) is enabled.
n
*1
.
/
,
m
*2
+
*
}