Need help?Do you have a question about the Onkyo TX-NR626 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 5 - 100000 Hz |
| Pre-out channels | 2 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 160 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 6 |
| Composite video in | 5 |
| Digital audio coaxial in | 2 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | - |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Last.fm, Spotify |
| Optical drive included | No |
| Supported video modes | 1080p |
| Product color | Silver |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Damping factor | 60 |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 600 W |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 10000 g |
To Next Page
