Onkyo TX-NR809 Firmware Update

1
En
Firmware Update
To update the firmware of the AV receiver, you can choose from the following two methods:
update via network, or update via USB storage. Choose the one that best suits your
environment. Before proceeding with the update, please read the corresponding explanations
carefully.
■Update via network (➔ page 2)
You need a wired Internet connection to update the firmware.
■Update via USB storage (➔ page 4)
Please prepare a USB storage device such as a USB flash memory stick. You need at
least 32 MB of available space to update the firmware.
Note
• Check the network connection before updating.
• Do not touch the any cable or device connected to the AV receiver during the update process.
• Do not attempt to access the AV receiver from your PC while it is being updated.
• Do not shutdown the power of the AV receiver while it is being updated.
• The storage media in the USB card reader may not work.
• If the USB device is partitioned, each section will be treated as an independent device.
• If the USB device contains a lot of data, the AV receiver may take a while to read it.
• Operation is not guaranteed for all USB devices, which includes the ability to power them.
• Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a
USB device with the AV receiver. Onkyo recommends that you back up your important music files
beforehand.
• If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter
to power it.
• USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via
a USB hub.
• USB devices with security functions are not supported.
Limitation of liability
The program and accompanying online documentation are furnished to you for use at your
own risk. Onkyo will not be liable and you will have no remedy for damages for any claim of
any kind whatsoever concerning your use of the program or the accompanying online
documentation, regardless of legal theory, and whether arising in tort or contract. In no event
will Onkyo be liable to you or any third party for any special, indirect, incidental, or
consequential damages of any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of present or prospective profits, loss of
data, or for any other reason whatsoever.

Onkyo TX-NR809 Specifications

General

Impedance	16 Ω
Receiver type	Surround
Frequency range	5 - 100000 Hz
Output impedance	2200 Ω
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.08 %
Dynamic power per channel (3 Ohm)	300 W
Dynamic power per channel (4 Ohm)	250 W
Dynamic power per channel (8 Ohm)	150 W
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	8
AC (power) in	Yes
Audio (L/R) in	6
Composite video in	1
S-Video inputs quantity	4
Digital audio optical in	3
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-Fi	No
RDS features	PS, PTY, RT, TP
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Internet radio services supported	Last.fm, Napster, vTuner
Supported video modes	1080i, 1080p, 480i, 480p, 720p
Display	-
Product color	Silver
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Volume control	Rotary
Apple docking compatibility	iPhone, iPod
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (typical)	710 W
Certification	CE, EMC
THX-certified	THX Select2 Plus
Package weight	22500 g
Package depth	553 mm
Package width	587 mm
Package height	337 mm

Weight and Dimensions

Depth	435.5 mm
Width	435 mm
Height	198.5 mm
Weight	18300 g