Specifications (TX-SR601/601E)
AMPLIFIER SECTION
Continuous average power output (FTC)
All channels: 85 W per channel lnin. RMS at 8 _2,
Continuous power output (DIN)
Maximmn power output (E[AJ)
Dynamic power output (stereo)
Total harmonic distortion:
IM distortion:
Damping factor:
Input sensitivity and impedance
LINE (CD, TAPE, DVD,
VIDEO I-4):
MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R):
(SUBWOOFER):
COAXIAL (DIGITAL):
DVD, VIDEO I, 2, 3, 4:
COMPONENT VIDEO I, 2:
Output level and impedance
Rec out (TAPE, VIDEO I, 2):
Line out:
Pre out:
VIDEO (VIDEO I, 2,
MON (TOR OUT):
COMPONENT VIDEO OUT:
Frequency response:
_ne COlltrol
Bass:
Treble:
Signal-to-noise ratio (stereo)
CD/Tape:
Muting:
2 ,'hannels driven from 20 Hz to 20
kHz with no more than 0.08% total
harmonic distortion.
110 W mln. RMS at 6 [), 2 channels
driven from 1 kHz with no more
than 0.1% total harmonic distolqion.
120Wat 6_)
150 W at 6 _
2 × 220W at 3 g)
2×165Wat4g)
2×llXlWat8_)
0.08% at rated power
0.118% at I W output
0.08% at rated power
0.118% at I W output
611at 8 _
200 mV. 47 kS)
200 mV, 47 kg)
36 mV, 47 kg)
0.5 Vp-p, 75 _2
I Vp-p, 75 g)
1 Vp-p, 75 _ (Y)
0.28 Vp-p, 75 _) (C)
I Vp-p, 75 g) (Y)
0.7 Vp-p, 75 _) (Pu, PR)
200 mV, 470 _)
100 mV, 470 _) (Zone 2)
I V, 470 £2
I Vp-p, 75 _
1 Vp-p, 75 _) (Y)
0.28 p-p, 75 _2 (C)
I Vp-p, 75 _2 (Y)
0.7 Vp-p, 75 £2 (PB, PR)
10 Hz to 100 kHz: +113 dB
(CD in Direct mode)
-+10 dB at 50 Hz
-+10 dB at 20,000 Hz
I(g) dB ([HF A, 0.5 V input)
.....50 dB
TUNER SECTION
FM
Tuning range:
USA & Canadian models:
Other area models:
Usable sensitivity
Mollo:
Stereo:
50 dB quieting sensitivity
Mollo:
Stere():
Capture ratio:
Image rejection ratio
USA & Canadian models:
Other area models:
IF rejection ratio:
Signal<o-noise ratio
MOl)O:
Stereo:
Alternate channel attenuation:
Selectivity:
AM suppeession ratio:
Total harmonic distortion
Mol)o:
Stere():
Frequency response:
Stereo separation:
AM
Tuning range
USA & Canadian models:
European & Australian models:
Worldwide models:
Usable sensitivity:
Image rejection ratio:
IF rejection ratio:
SignaI<omoise ratio:
Total harmonic distortion:
87.51 108.00 MHz (l(Xl-kHz steps)
87.50 108.00 MHz (50-kHz steps)
11.2 dBf, 1.0 pV (75 ff_ IHF)
0.9 b+V (75 _'_ DIN)
17.2 dBf, 2.0 pV (75 ff_ IHF)
23 pV (75 f] DIN)
17.2 dBf, 2.0 pV (75 _'_)
37.2 dBf, 20 pV (75 f])
2.0 dB
40 dB
85 dB
90 dB
76 dB
70 dB
55 dB
50 dB (DIN)
50 dB
0.2%
0.3%
30Hz 15kHz,-+l.0dB
45dBat lkHz
30 dB at 100 Hz-I 0 kHz
530 to 1,7 Ill kHz (10-kHz steps)
522 to 1,611 kHz (9-kHz steps)
522 to 1,611 kHz (9-kHz steps)
530 to 1,710 kHz (lll-kHz steps)
30 _V
40 dB
40 dB
40 dB
0.7%
GENERAL
Power supply
USA & Canadian models:
Em'upean & Australian models:
Some Asian models:
Worldwide models:
Power con su mptiol)
USA & Canadian models:
Other models:
Dimensions (W x H × D):
AC 120 V, 60 Hz
AC 230240 V, 50 Hz
AC 221 230 V, 50/611 Hz
AC 22(230 and 120 V switchable,
511160 Hz
5.3A
550 W
435 × 175 ×431.5 mm
17-1/8" × 6-718" × 16q 5/16"
Weight
USA & Canadian models: 26.7 tbs.
Other models: 12.9 kg
REMOTE CONTROLLER
Transmitter:
Signal range:
Power supply:
Infrared
Approx. 16 1i., 5 meters
Two "AA" batteries (1.5 V × 2)
Specifications and features are subject to change without notice.
79
To Next Page
Loading...
