To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SA805 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Signal-to-Noise Ratio | 110 dB |
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| HDMI Switching | Yes |
| 3D Technology | No |
| HDMI | Yes |
| Phono Input | Yes |
| USB Port | No |
| Network Connectivity | No |
| Bluetooth | No |
| Wi-Fi | No |
| Frequency Response | 5Hz-100kHz |
| Input Impedance | 47k ohms |
| Response Bandwidth | 5Hz |
| Output Power / Channel | 130.0 Watt |
| Output Impedance / Channel | 8 ohms |
| Sound Output Mode | Surround |
| Built-in Decoders | Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx, DTS, DTS-ES, DTS 96/24, DTS Neo:6 |
| Digital Audio Inputs | Optical, Coaxial |
| Power Output | 130W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Amplifier Output Details | 130W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
Critical components for fire/shock risk require specific replacement parts.
Visual breakdown of components for assembly and disassembly.
High-level diagrams illustrating signal flow for audio, video, and control.
Detailed electrical diagrams of the unit's circuits, covering various sections.
High-level block diagram of the system's core IC functions.
Detailed terminal descriptions for microprocessor and DSP ICs.
Block diagrams for DAC and analog switch ICs.
Block diagram and terminal descriptions for the video processor IC.
Block diagrams and terminal descriptions for HDMI receiver and transmitter ICs.
Procedures for replacing fuses and performing critical safety checks after service.
Instructions for updating the unit's firmware for key components.
Diagnostic procedures for checking speaker protection, power supply, and performing adjustments.
Procedure to calibrate the video processor IC (Q8001) before unit mounting.
Comprehensive list of components with part numbers and remarks.
List of part numbers for various printed circuit boards.
