FIRMWARE UPDATE -1
TX-SR805/SA805
How to Check the Versions of Main, DSP(1st to 3rd), HDMI and Video Firmware
1. Press and hold down [DISPLAY] button, then press [STANDBY/ON] button when the unit is power on.
The main microprocessor version will be displayed on Front Display for about 3 seconds.
2. Press [Tone +] button while the version is displayed. Then, “
DSP 1st SR8051/07601A
” will be displayed.
Press [Tone +] button again while “
DSPS8051:07601A
” is displayed. Then, “
DSP 2nd: SR8052/07601A
”
will be displayed. In this way, as [Tone +] button is pressed while a version is displayed, the next information
will be displayed. If [Tone -] button is pressed, the order will be reversed.
DSP 2nd:
SR8052:07518A
DSP 1st:
SR8051:07601A
Main:
8 1.05/07903A
Main:
8 1.05/07903A
<e.g.>
Video:
3.62/07717A
HDMI:
1.01/07706A
Net:
1.00/07602A
DSP 3rd:
SR8053:07820B
[Tone +][Tone -]
Note: These versions are the latest as of Sep. 19, 2007.
Network FW: only for DTR-7.8
To Next Page
Loading...
