What to do if there is no sound from TV on Onkyo Stereo Receiver?
If you're not getting any sound from the TV through your Onkyo Stereo Receiver, first ensure that the input selector on the receiver is set to the correct terminal to which the TV is connected. If your TV does not support the ARC (Audio Return Channel) function, connect the TV to the receiver using both an HDMI cable and a digital optical cable.
Why does my Onkyo TX-NR696-S Stereo Receiver turn off unexpectedly?
If your Onkyo Stereo Receiver turns off unexpectedly, it could be due to a few reasons. First, check if the 'Auto Standby' feature is enabled in the Setup menu under '5. Hardware' - 'Power Management,' as this will automatically put the unit into standby mode. Another possibility is that the protection circuit has been activated due to the unit overheating. To resolve this, ensure there is sufficient ventilation around the unit and allow it to cool down before turning it on again. If neither of these resolves the issue, unplug the power cord immediately and contact your dealer or Onkyo support.
How to fix 'AMP Diag Mode' on Onkyo Stereo Receiver?
If 'AMP Diag Mode' appears on the display of your Onkyo Stereo Receiver when you turn it on, the protection circuit function may have been activated. To resolve this, set the receiver to standby, then reconnect the speaker cables, ensuring that no stray wires are sticking out from the speaker terminals. Twist any exposed wires at the tip of the speaker cable to prevent them from touching. If the issue persists, immediately set the unit to standby, remove the power plug from the outlet, and consult a dealer, as the unit may be malfunctioning.
General| THX-certified | THX Select |
|---|---|
| 3D | Yes |
| Supported graphics resolutions | 3840 x 2160 |
| HDCP version | 2.2 |
| Apple docking | - |
| Product color | Silver |
| Audio decoders | DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD |
| Volume control | Rotary |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Deezer, Spotify, Tidal, TuneIn |
| Receiver type | Surround |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 240 W |
| Dynamic power per channel (4 Ohm) | 210 W |
| Dynamic power per channel (8 Ohm) | 120 W |
| Power output per channel (1KHz@6 Ohm) | 175 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio formats supported | AIFF, ALAC, DSD, FLAC, WAV |
| HDMI in | 7 |
| Digital audio optical in | 1 |
| Headphone connectivity | 6.3 mm |
| Number of HDMI outputs | 2 |
| Phono inputs (RCA) | 4 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 570 W |
| Package depth | 468 mm |
| Package width | 534 mm |
| Package height | 265 mm |
| Package weight | 12500 g |
| Optical drive included | No |
Weight and Dimensions| Depth | 379.5 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 10000 g |
Details on connecting various speaker configurations and setup.
Instructions for connecting the unit to a TV, including ARC support.
Guide on connecting external AV components like players via HDMI.
How to connect components for audio/video output to a second zone.
Guide for connecting pre-main amplifiers or wireless headphones to ZONE B.
Instructions for connecting FM and AM antennas for radio reception.
Steps for connecting the unit to a network via wired or wireless LAN.
Instructions for connecting the power cord after all other connections are made.
How to play audio from connected AV components like Blu-ray players.
Instructions for wirelessly playing audio from BLUETOOTH-enabled devices.
Guide to accessing and playing Internet radio services like TuneIn Radio.
Information on using Spotify as a remote control for playback.
Instructions for playing music wirelessly from iOS devices via AirPlay.
Details on using DTS Play-Fi for wireless music playback and group playback.
Guide to enjoying group playback with multiple audio products supporting FlareConnect.
How to play music files stored on a USB storage device.
Instructions for streaming music from PCs or NAS devices via network.
How to save and manage favorite playlists (Play Queue information).
Guide to registering and playing music from the Amazon Music service.
Instructions for connecting and using the unit with a Sonos Connect system.
How to tune into and listen to AM and FM radio stations using the built-in tuner.
Enjoying audio in a separate room (ZONE 2) while playing in the main room.
How to enjoy audio simultaneously with a pre-main amplifier or wireless headphones.
Features like displaying video while playing music and quick menu access.
How to select and use various listening modes for movies, music, and games.
How to make settings using the on-screen displays (OSD) on the TV.
Configuring TV output, OSD, and HDMI/Digital/Analog audio input assignments.
Settings for speaker configuration, crossover, distance, and levels.
Adjusting settings for multiplex audio, Dolby, DTS, LFE, and volume.
Setting input volume, name, and priority for audio/video sources.
Configuration options for HDMI, Network, Bluetooth, Power Management, and SONOS.
Settings for Zone 2 and remote play zone configurations.
Settings for Tuner, Remote ID, Firmware Update, Initial Setup, Lock, and Factory Reset.
How to configure network functions using an internet browser on a PC or smartphone.
Guide for the first-time setup process using an on-screen wizard.
Basic steps to resolve erratic behavior, including restarting the unit.
Procedure to restore all unit settings to factory defaults.
Troubleshooting issues related to power, including diagnostic modes and unexpected shutoffs.
Solutions for audio problems like no sound, poor quality, or interruptions.
Troubleshooting issues with selecting or playing specific listening modes.
Solutions for video issues like no image, flickering, or sync problems.
Troubleshooting HDMI linked operations with CEC-compliant devices.
Resolving issues with poor reception or noise when using the tuner.
Troubleshooting connection and playback issues with BLUETOOTH devices.
Solutions for problems with internet radio, network server access, and sound interruption.
Resolving issues with USB storage device recognition and playback.
Troubleshooting wireless LAN connection and playback problems.
Solutions for issues with outputting audio to ZONE B.
Troubleshooting audio output for externally connected components in multi-zone setups.
Common issues and solutions related to the remote controller's operation.
Troubleshooting problems with the unit's display, such as it not lighting up.
Addressing other troubleshooting topics like strange noise or error messages.
Tips for lowering power consumption when the unit is in standby mode.
Explanation of HDMI functions, compatibility, and supported formats.
Technical specifications for the amplifier, tuner, network, and Bluetooth sections.
To Next Page
