Why does my Onkyo Stereo Receiver turn off unexpectedly?
Your Onkyo Stereo Receiver might be turning off unexpectedly because the 'Auto Standby' feature is enabled in the Setup menu. The unit automatically enters standby mode. Alternatively, the protection circuit may have activated due to the unit overheating. Ensure sufficient ventilation around the unit, wait for it to cool down, and then try turning it on again.
What to do if "AMP Diag Mode" appears on my Onkyo TX-NR595?
If "AMP Diag Mode" appears on the display of your Onkyo Stereo Receiver when you turn it on, it could indicate that the protection circuit has been activated. To resolve this, set the unit to standby, then reconnect the speaker cables, ensuring no stray wires are sticking out from the speaker terminals. If the issue persists, set the unit to standby immediately, remove the power plug from the outlet, and consult a dealer, as the unit may be malfunctioning.
General| Channels | 7.2 |
|---|---|
| HDMI Outputs | 2 |
| Audio Formats Supported | Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Speaker Impedance | 4 - 16 ohms |
| HDCP Support | 2.2 |
| Video Pass-Through | Yes |
| Audio Return Channel (ARC) | Yes |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| Phono Input | Yes |
| Zone 2 Audio Output | Yes |
| Subwoofer Output | 2 |
| Speaker Connectors | Binding Posts |
| Ethernet | Yes |
| Wi-Fi Bands | 2.4 GHz / 5 GHz |
| Bluetooth Version | 4.1 |
| Tuner Section | FM/AM |
| Voice Assistant Support | Google Assistant, Amazon Alexa |
| Room Correction | AccuEQ |
| Power Output (8 ohms) | 80 W |
| HDMI Inputs | 6 |
| Power Output per Channel | 80W (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven) |
| THD+N (Total Harmonic Distortion + Noise) | 0.08% (20Hz-20kHz, half power) |
| Input Sensitivity and Impedance | 200mV/47k ohms (Line) |
| Frequency Response | 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) |
| Signal to Noise Ratio | 106dB (Line, IHF-A) |
| HDR Compatibility | HDR10, Dolby Vision, HLG |
| Analog Audio Inputs | 4 |
| USB | Yes |
| Internet Radio Services | TuneIn |
Details how to connect various external devices and speakers to the unit.
Covers how to play audio and video from various sources and services.
Guides users through initial and advanced configuration settings for the unit.
Offers solutions for common problems and operational issues encountered with the unit.
Identifies and describes the various connection terminals and ports on the rear of the AV receiver.
Details the functions and operations of the included remote control unit.
Guides on how to connect various speaker configurations for optimal sound.
Explains how to connect the unit to a television, including ARC functionality.
Details how to connect external audio and video sources like players and game consoles.
Covers network setup, antenna connection, power cord, and multi-zone/ZONE B audio.
Details the setup and speaker placement for a standard 5.1 surround sound system.
Explains the setup for a 7.1 surround sound system, including rear surround speakers.
Describes the setup for a 5.1 system with added height speakers for immersive audio.
Details the correct method for connecting speaker cables and setting speaker impedance.
Instructions for connecting the unit to a TV that supports the Audio Return Channel (ARC) function.
Steps for connecting to a TV that does not support the Audio Return Channel (ARC) function.
Shows how to connect AV components using HDMI for video and audio transmission.
Explains Bluetooth, AirPlay, DTS Play-Fi, and FlareConnect for wireless audio streaming.
Lists all available configuration options and their corresponding page numbers in the setup menu.
Covers settings for speaker channels, subwoofer, height speakers, and zone speakers.
Settings for network connection, including Wi-Fi setup, DHCP, and IP address configuration.
Step-by-step guide for the initial setup process using the on-screen wizard upon first use.
Covers speaker setup, AccuEQ calibration, multi-zone sound check, and network connection settings.
Steps to take when the unit behaves unexpectedly or freezes, including restart and reset.
Covers common issues related to power, audio, video, network, Bluetooth, tuner, USB, wireless LAN, and display.
To Next Page
