Onkyo TX-NR595 - Digital Audio Input Assignment

107
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
TV --- "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the TV button. If
you do not assign a jack, select "---". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "---" rst.
PHONO --- "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)":
Assign a desired HDMI IN jack to the PHONO
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
 3. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD COAXIAL "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the BD/DVD button.
GAME --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the GAME button.
CBL/SAT --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the CBL/SAT button.
STRM BOX --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the STRM BOX button.
PC --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the PC button.
CD --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the CD button.
TV OPTICAL "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the TV button.
PHONO --- "COAXIAL", "OPTICAL": Assign a desired DIGITAL
IN jack to the PHONO button.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.