
Do you have a question about the Onkyo TX-SR504 and is the answer not in the manual?
| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Signal-To-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| HDMI Switching | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Inputs | Component video x 2, composite video x 4, digital audio (coaxial) x 1, digital audio (optical) x 1, HDMI x 2 |
| Outputs | Component video x 1, composite video x 2, HDMI x 1 |
| Audio Formats Supported | Dolby Digital, DTS |
| Dimensions | 17.1 x 6.8 x 15.4 inches (435 x 173 x 391 mm) |
| Response Bandwidth | 10Hz-100kHz |
| Input Impedance | 47 kOhms |
| Tuning Range | FM: 87.5-108 MHz, AM: 530-1710 kHz |
| Preset Station Qty | 40 |
| Connector Type | HDMI, RCA |
| Speaker Impedance | 6-16 ohms |
| Power Output | 75 watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
Procedure for checking speaker protection using DC voltage detection.
Detailed steps for adjusting idling current using trimming resistors.
Loading...