Need help?Do you have a question about the Onkyo TX-SV50PRO and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Amplifier Type | Stereo |
| Power Output | 100 W |
| Channels | 5.1 |
| Frequency Response | 20 - 30000 Hz |
| Total Harmonic Distortion (THD) | 0.08% |
| THD | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions | 435 x 150 x 391 mm |
| Weight | 11 kg |
| Speaker Impedance | 8 - 16 Ohm |
| Video Connections | Composite |
Read, retain, heed, and follow all safety and operating instructions.
Instructions for setting voltage selector and tuning step frequency.
Explains Dolby Pro Logic, digital time delay, and surround sound.
Details on Dolby Pro Logic, Dolby 3 Stereo, Hall, and Matrix modes.
Using HR-10 sensor and RC-AV50M transmitter.
Connecting AC outlets, front, rear, and sub room speakers.
Connecting turntables, CD players, and tape decks.
Connecting VCRs, video disc players, camcorders, and TVs.
Connecting a center power amplifier to the unit.
Connecting Onkyo equipment using the RI system.
Connecting for control from another room.
Step-by-step guide for learning remote control codes.
Troubleshooting no power or no sound issues.
Resolving hum, howling, crackling, buzzing, and distortion.
Troubleshooting tuned indicators, stereo indicators, and station recall.
Troubleshooting multi-room remote system operation.
To Next Page
