Need help?Do you have a question about the Onkyo TX-SV444 and is the answer not in the manual?
General| Frequency Response | 20Hz to 30kHz |
|---|---|
| Input Sensitivity (line) | 200mV |
| Signal-to-Noise Ratio (line) | 100dB |
| Input sensitivity (MM) | 2.5mV |
| Signal to noise ratio (MM) | 80dB |
| Dimensions (mm) | 435 x 150 x 390 |
| Weight (kg) | 11.3 |
| Signal to Noise Ratio (line) | 100dB |
| Speaker Impedance (minimum) | 8 Ohms |
| Total Harmonic Distortion | 0.08% |
| Power output per channel | 80W (8 ohms, 1kHz, 0.9% THD) |
| Speaker load impedance | 8 ohms |
| Power Output (Stereo) | 80 watts per channel |
Detailed technical specifications for the amplifier output, distortion, and frequency response.
Technical details regarding video signal sensitivity and impedance for inputs and outputs.
Performance data for FM and AM tuning, sensitivity, selectivity, and stereo separation.
General operational parameters including power supply, consumption, dimensions, and weight.
Technical details of the infrared transmitter's signal range and power.
Guidelines for safely replacing fuses, emphasizing correct type and rating.
Steps to reset the microprocessor and restore factory default settings.
Crucial safety checks required after performing repairs.
Instructions for changing the unit's voltage setting for different power supplies.
Information on the unit's battery-less memory backup system.
Procedure for setting the AM tuning step frequency based on region.
Method for changing band step settings by replacing specific components.
Step-by-step instructions for calibrating FM reception parameters.
Step-by-step instructions for calibrating AM reception parameters.
Details on circuit modifications and parts replacements to reduce abnormal idling current.
To Next Page
