Need help?Do you have a question about the Onkyo TX-SV919THX and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| THX Certification | Yes |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100dB |
| Video Connections | Composite video, S-Video |
| Power Output | 100 W per channel (8 ohms) |
Meets stringent THX licensing standards for home theater sound.
Provides superior sound imaging, clearer dialogue, and better effects localization.
Recreates acoustic environments like famous venues using digitally processed DSP.
Decodes four-channel surround sound from two-channel sources for immersive audio.
Recreates a movie theater experience using Dolby Surround media.
Guidelines for placing speakers in a THX system for optimal surround sound.
Guide on connecting front, surround, and center speakers for optimal surround sound reproduction.
Connects external power amplifiers to PRE OUT terminals for enhanced power output.
Connects external preamplifiers to MAIN IN terminals for expanded audio processing.
Detailed identification and description of all buttons, indicators, and jacks on the front panel.
Introduces the RC-267M's ability to memorize codes from other remotes.
Detailed steps (1-6) for memorizing controller codes using the RC-267M.
Accessing and navigating the Screen Setup menu for display customization.
Step-by-step guide to powering on, selecting sources, and setting volume.
How to navigate and change parameters using the selector and controller buttons.
Using Parameter Selector/Controller and remote control cursors for system setup.
Navigating menus for speaker selection, center speaker mode, and subwoofer settings.
Selecting the appropriate mode for the center speaker based on its size and usage.
Settings for subwoofer operation and for applying low/high pass filters.
Adjusting delay time for front-to-surround channel leakage reduction.
Using the test tone to calibrate channel levels for accurate sound balance.
Overview of the Initialize function to restore default settings.
Resetting all Surround Setup parameters to their factory default values.
Resetting all System Setup parameters to their factory default values.
How to manually tune FM/AM stations using the TUNING buttons.
How to input specific frequencies directly to tune radio stations.
How to store specific FM frequencies into memory classes (A-F).
Guides for recording audio onto TAPE-1 and TAPE-2 decks, including dubbing.
Identifies main unit controls used for selecting and adjusting surround modes.
How to select recording sources using the remote control and on-screen display.
How to cycle through and select different surround modes using the unit's buttons.
Using the remote control and on-screen display to select and adjust surround modes.
Decodes four-channel sound from two-channel sources for immersive audio.
Recreates a movie theater experience using Dolby Surround media.
Step-by-step guide to selecting surround modes using the remote's cursor keys and on-screen menu.
Steps to select source, mode, and adjust system setup for Dolby Pro Logic.
How to set Dolby Pro Logic parameters using the remote and on-screen display.
Steps to select HOME THX CINEMA mode and adjust system setup parameters.
How to set THX CINEMA parameters using the remote and on-screen display.
Steps to select Theater mode and adjust speaker position, size, and effects.
How to set Theater parameters using the remote and on-screen display.
Steps to select Stadium mode and adjust stadium size, dialog fade, and effects.
How to set Stadium parameters using the remote and on-screen display.
Steps to select modes and adjust hall size, shape, and effects.
Detailed technical specs for power output, distortion, sensitivity, and frequency response.
Technical data for FM and AM tuner performance, including sensitivity and distortion.
To Next Page
