Need help?Do you have a question about the Onkyo TX-SV313PRO and is the answer not in the manual?
Amplifier Section| power output front L/R channels | 60 watts per channel at 8 ohms |
|---|---|
| power output surround mode front L/R channels | 55 watts per channel at 8 ohms |
| power output center and rear channels | 15 watts per channel at 8 ohms |
| total harmonic distortion | 0.08 % at rated power (FRONT L/R) |
| damping factor | 60 at 8 ohms (FRONT UR) |
Tuner Section| FM tuning range USA | 87.5 - 108.0 MHz |
|---|---|
| AM tuning range USA and Canadian models | 530 - 1710 kHz |
| image rejection ratio | 40 dB |
| IF rejection ratio | 90 dB |
| signal-to-noise ratio mono | 73 dB |
| signal-to-noise ratio stereo | 67 dB |
General| power supply USA and Canadian models | AC120V, 60 Hz |
|---|---|
| power supply worldwide models | 120 and 220V Switchable, 50/60 Hz |
| dimensions | 455 x 150 x 332 mm |
| weight | 10.1 kg |
Safety and operating instructions, warnings, and precautions for safe appliance use.
Guidelines for proper grounding of outdoor antennas as per electrical codes.
Details on power output, THD, and discrete output stage for clean sound.
Explains the Dolby Pro-Logic Surround system for multi-dimensional soundstage and dialogue localization.
Describes direct access tuning, random presets, and classified memory for station tuning.
Covers video component connections, tone control, and remote control compatibility.
Explains how surround sound effects are encoded and decoded for home theater experience.
Illustrates optimal speaker placement for surround sound effects in a listening room.
Details the three available modes for Dolby Pro Logic Surround based on center speaker configuration.
Lists all accessories provided with the TX-SV313PRO, such as antennas and cables.
Instructions for inserting batteries into the remote control transmitter and important usage precautions.
Guidelines for operating the remote control transmitter and factors affecting its performance.
General advice on connecting components, including channel identification and grounding.
Instructions for connecting FM/AM antennas and speaker systems to the unit.
Details on connecting various audio and video components like CD players, tape decks, VCRs, and turntables.
Identifies and explains the function of all controls located on the front panel of the unit.
Describes the various indicators and multi-function display elements on the unit.
Explains the operation of each button on the RC-251S remote control transmitter for various functions.
Details specific operations like sleep timer, tuner tuning, tape control, test tone, and volume adjustments.
Step-by-step guide on how to select a source, adjust volume, and set tone controls for listening.
Explains the function of key buttons such as Power, Speakers, Master Volume, and Tone Controls.
Information on the unit's memory back-up system and its preservation period.
Instructions on how to tune FM/AM stations using tuning buttons or direct frequency input.
Explains FM muting modes and how to classify and memorize stations into different categories.
Guides users through recording audio from different sources and dubbing between tape decks.
Instructions for connecting and utilizing a graphic equalizer with the unit for sound adjustment.
Details on activating Dolby Pro Logic Surround, adjusting delay time, and selecting center modes.
Explains how to use the TEST button and remote controls to adjust surround sound levels for optimal listening.
Provides solutions for common operational problems, causes, and remedies for the unit.
Technical specifications for the amplifier section, including power, distortion, and impedance.
Technical specifications for the video section and FM/AM tuner reception capabilities.
General specifications including power supply requirements, physical dimensions, and unit weight.
To Next Page
