Need help?Do you have a question about the Onkyo TX-SV434 and is the answer not in the manual?
Power Output| front L/R channels power output | 65 watts per channel |
|---|---|
| continuous power output | 2x 70 watts at 8 ohms |
| surround mode front L/R and center channels power output | 55 watts per channel |
Power Supply| U.S.A. & Canadian models power supply | AC 120 V, 60 Hz |
|---|---|
| European & Australian models power supply | AC 230 V, 50 Hz |
| worldwide models power supply | AC 220-230 V and 120 V switchable, 50/60 Hz |
Weight and Dimensions| dimensions (W x H x D) | 455 x 150 x 322 mm |
|---|---|
| weight | 9.6 kg |
| remote control dimensions (W x H x D) | 65 x 18 x 194 mm |
Detailed technical specifications for the audio amplifier, tuner, and video sections.
Information on maintenance, repairs, and operational checks for the unit.
Diagram illustrating the physical assembly of the unit's components.
Comprehensive list of all components used in the device.
High-level overview of the unit's functional blocks and signal flow.
Schematic showing connections to the main microprocessor unit.
Detailed explanations of the microprocessor's input/output terminals.
Step-by-step guide for calibrating and tuning the device.
Guidance on selecting and replacing internal fuses for safety and fire prevention.
Procedure to reset the unit's memory to factory default settings.
Essential safety checks after service for user protection against shock.
Instructions for switching the unit's voltage for different power supplies.
Information on how the unit retains settings and its backup system.
Procedure to set the AM tuning step for regional compatibility.
Methods for altering the AM tuning band step if needed.
Recommended settings for all control knobs and switches during adjustment.
Procedure to set the DC voltage for optimal amplifier performance.
Calibration steps for the FM tuner section.
Calibration steps for the AM tuner section.
To Next Page
