Need help?Do you have a question about the Onkyo TX-SV525R and is the answer not in the manual?
General| Frequency Response | 20 Hz - 30 kHz |
|---|---|
| Total Harmonic Distortion (THD) | 0.08 % |
| Weight | 10.4 kg |
| Input Sensitivity | 200mV |
| Speaker load impedance | 8 ohms |
| Video Connections | composite |
| Dimensions (W x H x D) | 435 x 150 x 391 mm |
Details the receiver's power output and discrete output stage for enhanced audio.
Explains surround sound processing and DSP ambience modes for immersive audio.
Describes Onkyo's Intelligent Power Management for automatic power-on.
Explains listening to different audio sources in multiple rooms.
Highlights the remote's ability to control other RI-equipped Onkyo components.
Emphasizes reading, retaining, heeding warnings, and following all operating instructions.
Advises against water, moisture, heat, and ensures proper ventilation and placement.
Guides on power sources, polarization, cord protection, and fuse information.
Details conditions requiring service and preventing object/liquid entry.
Explains grounding and placement of outdoor antennas away from power lines.
Covers warranty card, copyright notice, cleaning, and AC fuse.
Crucial warning on setting the correct voltage before first use.
Lists all accessories provided with the unit.
Guides setting the voltage selector and AM tuning step frequency.
Provides guidance on using the remote control and battery care.
Explains surround sound decoding and Digital Signal Processor effects.
Details the MRX system for extended control and listening.
Guides connecting CD players, turntables, and tape decks to the unit.
Explains how to connect video players and TVs to the unit.
Details connections for VCRs and monitor TVs.
Explains the IPM system's operation and connection requirements.
Guides connecting subwoofers and explains AC outlet functionality.
Details connecting components for remote control operation.
Explains proper speaker cable connection, including banana plugs.
Guides connecting speakers for main, surround, and multi-room use.
Provides guidance on placing speakers for effective surround sound reproduction.
Specific advice on positioning front, center, and rear speakers.
Offers recommendations for placing the subwoofer for optimal bass.
Guides connecting T-shaped and coaxial antennas using adaptors.
Explains directional linkage and assembling the AM loop antenna.
Details indoor use and positioning of the T-shaped FM antenna.
Recommends outdoor antennas for FM/AM and provides placement advice.
Details connecting the Xantech system for multi-room control (USA/Canada).
Illustrates connecting HR-10 and HE-50(AC) for multi-room control.
Provides specifications for cables used in multi-room systems.
Identifies all buttons and knobs on the unit's front panel.
Explains the unit's display elements and indicators.
Details the purpose and operation of each button on the remote control.
Guides the user through powering on and selecting an audio source.
Explains headphone connection and speaker output selection.
Details how to adjust master volume, bass, treble, and balance.
Guides users on tuning radio stations manually or directly by frequency.
Explains how to listen to stereo FM and convert to mono if needed.
Guides on storing and recalling radio stations using memory groups.
Instructions on how to delete stored radio station presets.
Defines RDS and its features like PS, PTY, TP, and RT.
Lists program type classifications for RDS broadcasts in Europe.
Explains searching for stations by program type or traffic information.
Guides on viewing Radio Text messages broadcast by stations.
Details how to assign custom names to preset radio stations.
Instructions for clearing all entered station names from memory.
Describes various surround modes like Dolby Pro Logic, Theater, Hall, Live, Arena, and By-Pass.
Explains center speaker modes and adjusting surround delay time.
Guides configuration for Dolby Pro Logic or Theater surround sound.
Details how to adjust specific settings for Hall, Live, and Arena modes.
Explains how to record audio to a tape deck from various sources.
Guides recording the currently played source or a different one.
Covers recording to TAPE-2, using a graphic equalizer, and recording to VCRs.
Explains recording TV broadcasts and mixing audio for VCRs.
Details using the MRX system and remote control for other rooms.
Guides on selecting sources, adjusting levels, and activating remote speakers.
Addresses problems related to power, sound, hum, and howling.
Covers sound quality, AM/FM reception, and noise problems.
Solves issues with preset stations, multi-room systems, and remote controls.
Details power output, distortion, and input/output specs for the amplifier.
Lists FM/AM tuning ranges, sensitivity, and signal-to-noise ratios.
Covers video input sensitivity and general specs like dimensions and power.
To Next Page
