Onlincam C16 - Playing Back on Tv

◼ SYSTEM SETTING:
Language: English / Español / Deutsch / Italiano / Français / 简体中文 / 日本語
Volume: 0~10
Remote: On/Off
Car Mode: On/Off
Diving Mode: On/Off
Exposure: +2~-2
Date & Time: ___Y___M___D 00:00:00
Stamp: On/Off
Upside Down: On/Off
Screen Saver: Off/30sec./1min./3min.
Power Off: Never/1Mins/5Mins
Format: YES/NO
Reset: YES/NO
FW Version:
PLAYBACK
◼ Playing back on camera
1. Enter Video or Photo playback mode. If your SD card contains a lot of content, it might
take a minute for it to load.
2. Press the Up / Down Button to scroll through the video or photo files.
3. Press Shutter Button to open video or photo in full-screen view.
4. To return to the thumbnails screen, press Mode Button.
5. To exit the gallery, press Mode Button.
◼ Playing back on TV
1. Turn on the TV
2. Connect the Mini HDMI end to the port on camera and HDMI end to HDMI port on the
TV
3. Select the right input source on the TV
4. Turn on the camera after a while, you can preview the camera from TV
5. Setting your camera into the video/photo playback mode
6. Select the desired file to playback
Notes:
1. If the camera is connected TV with HDMI cable, the camera do not support to take