9
Time Stamp Change:
1. Connect the unit to the computer as instructed earlier.
2. Open the storage folder on the computer.
3. You will find a TXT file named “TIMEREST.txt” in the storage folder.
4. Open the TXT file then input the time as a fixed format: “Year Month Day Hour
Minute Second Y/N”. For example, “2019-06-10,19:25:26Y” means 19:25:26, June
10, 2019.
5. Save the changes of the TXT file then disconnect the unit to computer.
6. Power on the unit. The time setting will be activated.
7. You will find the desired time stamp on the left bottom of the video screen.
Note: If you do not need the Time stamp on the video, rewrite the default time setting
“
2019-01-01,00:00:00Y
”
to any other time, and change
“
Y
”
to
“
N
”
.
TV Mode:
1. Power on the unit as instructed earlier.
2.
Connect the supplied USB Connection Cable to the Mini USB Port on the unit.
3.
Connect the TV out end of the cable to a TV out port on the TV.
4.
You can see the live image from the unit on the TV.
5.
Then you can take video or picture as instructed earlier.
December 31, 2019_V1
To Next Page