8
video clips as it records. When it runs out of space on the memory card, the unit will
automatically record over the oldest files by date.
Dark Mode:
1. Power on the unit and enter any standby Mode as instructed earlier.
2. Press and hold the Button for 3 seconds then release, the Red Indicator will
blink two times then turn off.
3. The Infrared LEDs will turn on. The video quality in dark environments will be
improved.
4.
In Standby Mode press and hold the Button for 3 seconds then release again
to turn off the Dark Mode, the Red Indicator will blink two times then turn off.
Motion Detection Mode:
1. Power on the unit and enter one of the three video record standby Mode
(720P/1080P/VGA) as instructed earlier.
2.
Press and hold the Button for 2 seconds then release, the Red Indicator will blink.
The unit will turn to Motion Detection Mode.
3.
Once the Lens detects any movement in front of the unit, It will start video
recording till 1 minute after the movement stops, then it will be back to the Motion
Detection Mode. The Red Indicator will blink again.
4. Short press any Buttons to exit Motion Detection Mode, the unit will stop video
recording and back to video record standby Mode.
To upload photo/video files to your PC:
1. Connect the supplied USB Connection Cable to the Mini USB Port on the unit.
2. Connect the full size USB end of the cable to a USB Port on the Computer.
3. The unit will automatically power on. The Blue Indicator will illuminate and the
Red Indicator will keep blinking.
4.
Wait a few moments, the storage folder for the unit will appear on the computer
screen.
5.
Follow the on-screen instructions to watch, upload or save the files to the PC.
NOTE:
Compatible computer operation system: Windows XP; Windows Vista;
Windows 7; Windows 8 and Windows10.
December 31, 2019_V1
To Next Page
Loading...