J
James DeckerNov 15, 2025
What to do if my Onward 24025-913 burner is not lighting?
- JJoshua GreenNov 16, 2025
If your Onward Grill burner isn't lighting, there are several potential causes and solutions: * **Out of LP Gas:** Refill your LP Gas Cylinder. * **Ignitor issue:** Try manually lighting the burner with a match. If it lights, the issue is with the ignitor (see "Ignitor not Working"). * **Excess flow safety device activated:** Follow the solution for "Flickering Flame or Low Temperatures on HIGH setting". * **Regulator not fully connected:** Tighten the regulator hand wheel. * **Leak in the system:** Leak test connections to find and tighten any loose fittings. * **Venturi blocked or misaligned:** Remove the burner, clean the venturi, and realign it with the valve orifice. * **Orifices blocked:** Remove the burner and clean the orifices with a pin or fine wire (do not drill)....






