Page 15
Using the OontZ app for Speaker Updates
Select the Menu in the upper left hand corner of the app.
Select ‘Device Information’ from the menu to check the version of the current firmware version on the OontZ Angle 3 Shower -
PLUS Edition and whether there is a new version available.
The firmware version of the OontZ Angle 3 Shower -
PLUS Edition is shown under ‘Main Version’.
If there is a new version of firmware for the OontZ
Angle 3 Shower - PLUS Edition a red ‘New’ will be
displayed next to ‘Main Version’ label.
Important Note: During the update make sure the
OontZ Angle 3 Shower - PLUS Edition is plugged into
power and the iPhone or Smartphone is not
interrupted by a phone call during the update of the
OontZ Angle 3 Shower - PLUS Edition.
To Next Page
Loading...
