136 Vehicle care
2. Remove bulb from socket, insert
new bulb.
3. Insert bulb holder in reflector.
4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light
1. Remove protective cover.
2. Withdraw bulb holder from
reflector by turning anticlockwise.
3. Remove bulb from socket, insert
new bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light
1. Remove protective cover.
2. Withdraw bulb holder from
reflector by turning anticlockwise.
3. Push bulb into holder slightly,
rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.