140 Vehicle care
Removable rear courtesy light
1. Press the button at the top of the
lamp assembly to release it.
2. Prise the lamp assembly out at the
points illustrated.
3. Renew bulb, ensuring it engages
correctly.
4. Reinstall lamp assembly.
Instrument panel
illumination
Have bulbs replaced by a workshop.
Electrical system
Fuses
Data on the replacement fuse must
match the data on the defective fuse.
There are two fuse boxes in the
vehicle:
■ on the right of the engine
compartment, next to the battery
■ behind a cover on the lower part of
the instrument panel, on the driver's
side
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire. Do not replace the fuse
until the cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
To Next Page
Loading...
