Seats, restraints 37
Rear seats
9 Warning
Never adjust seats while driving as
they could move uncontrollably.
Folding the seats
The load compartment area can be
increased by folding up the rear
seats.
9 Warning
When folding the seat use caution
- beware of moving parts. Ensure
the seat is secure when
completely folded.
■ Lower the head restraint and move
the seat belt to one side.
■ Remove the load compartment
cover if necessary 3 57.
■ Pull the release lever and fold down
the backrest onto the seat cushion.
■ Pull the lower strap and fold the
seat assembly forwards.
■ Secure the folded seat in the
upright position by attaching the
flexible cord located on the seat
frame, to the rear seat head
restraint.
Unfolding the seats
■ To lower the rear seat, remove the
flexible cord and lower the seat
assembly to the floor, ensuring the
rear support is located on the
anchor point and securely latched.
■ Raise the backrest and adjust the
head restraint.
■ The backrest is properly engaged
when the red mark on the release
lever is no longer visible.
Removing the seats
■ Remove the seat head restraint
3 33 and remove load
compartment cover if necessary
3 57.
To Next Page
Loading...
