138 Vehicle care
10. Insert light housing in body,
ensuring correct positioning.
Tighten the three retaining
screws.
11. Switch on ignition, operate and
check all lights.
Side turn signal lights
Have bulbs replaced by a workshop.
Centre high-mounted
brake light
Have bulbs replaced by a workshop.
Number plate light
Tailgate
1. Insert screwdriver as indicated by
the arrows, press to the side and
release the bulb housing.
2. Turn the bulb holder anticlockwise
to remove from the bulb housing.
Remove the bulb by pulling.
3. Replace the bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise
5. Install the bulb housing ensuring it
engages correctly.
To Next Page
Loading...
