Vehicle care 173
3. Remove parking light socket from
reflector.
4. Remove bulb from socket and
renew bulb.
5. Insert holder in reflector. Place
protective cap in position and
close.
Fog lights
Have bulbs replaced by a workshop.
Front turn signal lights
1. Replace the bulbs through the
opening in the wheel housing.
2. Rotate bulb holder anti-clockwise
and disengage.
3. Push bulb slightly into the socket,
rotate anti-clockwise, remove and
renew bulb.
4. Insert bulb holder in the reflector,
rotate clockwise and engage.
To Next Page
