Opel Adam - Page 180

180 Vehicle care
TwinTop
1. Unscrew retaining nuts.
2. Remove bulb housing from
outside. Disengage plug by
pressing on flap and remove from
bulb holder.
3. Detach seal from bulb holder.
4. Disengage sockets by turning and
remove. Press locking tabs on the
long sides of the bulb holder
outwards; lift bulb holder at front
end and remove.
5. Remove and renew the bulb.
Reverse light/brake light (1)
Reverse light (2)
Fog light, may be only on one side
(3)
Reverse light (4)
Turn signal light (5)
6. Insert bulb holder in bulb housing
by first inserting the lug at the front
of the plug. Fold together bulb
holder, ensuring that it engages
properly. Insert sockets and
engage by turning.