Open Date EUROCODE 150 - User Manual

Eurocode Digi50 Controller V1.03 04/07/2005 Page - 1 -
EUROCODE SERIES
OPERATOR INSTRUCTIONS
PARTS LISTING
CIRCUIT DIAGRAMS
INSTALLATION DETAILS
These instructions cover the following models:-
EUROCODE 150
EUROCODE 180
EUROCODE 300
Designed and manufactured by:
OPEN DATE EQUIPMENT LIMITED
UNITS 8 & 9 PUMA TRADE PARK
145 MORDEN ROAD
MITCHAM
SURREY
CR4 4DG
UNITED KINGDOM
Tel: 0044 (0) 208 655-4999
Fax: 0044 (0) 208 655-4990
Email: sales@opendate.co.uk
Web site: www.opendate.co.uk
(Digi50 Controller)

Summary

Important Safety Instructions

Digi50 Operating Instructions

Foil Threading

Step-by-step guide for threading the foil through the printer rollers.

Initial Setting Procedure

Temperature Adjustment

Guidance on adjusting the printer's operating temperature for optimal print quality.

Print Dwell Adjustment

How to adjust print dwell time for contact duration with the substrate.

Setting Up Digi50 Controller

Digi50 Mode Settings for Temperature Tolerance Ranges

Dip Switch Settings

Temperature Range SW2 (No 4)

Thermistor Dip Switch Settings (SW1)

Digi50 Fault and Print Relay Connections

Digital Control Calibration

External Calibration Method

Step-by-step guide for calibrating the digital control unit's temperature settings.

System Faults

Digi50 Alarm System Faults

Thermistor Faults

Thermistor Short Circuit Fault

Troubleshooting steps for a thermistor short circuit fault.

Thermistor Open Circuit Fault

Troubleshooting steps for a thermistor open circuit fault.

Mechanical Fault Finding

Print Quality Deterioration

Open Date EUROCODE 150 Specifications

General

Brand	Open Date
Model	EUROCODE 150
Category	Printer
Language	English