Eurocode Digi50 Controller V1.03 04/07/2005 Page - 3 -
EC DECLARATION OF CONFORMITY
(Passed EMC Tests 24 November 2004)
We hereby declare that the following machinery complies with the essential health and
safety requirements of the Machinery Directive 98/37/EC, and the Low Voltage Directive
73/23/EEC and its amendments, and the requirements of the Electromagnetic Compatibility
Directive 89/336/EEC and its amendments.
Machine Description:
Hot Foil Printer with Digi50 Controller.
Model:
Eurocode
Type: .....................
Serial number: .....................
Manufactured by:
Open Date Equipment Limited.
Address
Units 8 & 9, Puma Trade Park,
145 Morden Road,
Mitcham,
Surrey. CR4 4DG
United Kingdom.
The following transposed harmonised European standards have been used
.
BS EN ISO 12100: part 1, 2003
.
Safety of machinery. Basic concepts, general principles for
design. Basic terminology, methodology.
BS EN ISO 12100: part 2, 2003
.
Safety of machinery. Basic concepts, general principles for
design. Technical principles.
EN294: 1992.
Safety of machinery. Safety distances to prevent danger zones being reached by
the upper limbs.
BS EN 563:1994.
Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to
establish temperature limit values for hot surfaces
.
EN60204: part 1, 1997
.
Safety of machinery. Electrical equipment of machines. Specification for
general requirements.
BS EN 61000-6: part 4, 2001
.
Electromagnetic compatibility (EMC). Generic standards.
Emission standard for industrial environments.
BS EN 61000-3: part 2, 2000
.
Electromagnetic compatibility (EMC). Limits. Limits for harmonic
current emissions. (equipment input current up to and including 16 A per phase)
BS EN 61000-3: part 3, 1994
.
Electromagnetic compatibility (EMC). Limits. Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with
rated current <= 16 A per phase and not subject to conditional connection.
BS EN 61000-6: part 2, 2001
.
Electromagnetic compatibility (EMC). Generic standards.
Immunity standard for industrial environments.
FCC Part 15 Verification , Class A
.
Conducted and Radiated Emissions.
In addition, this machinery has been designed and manufactured in accordance with:-
PD 5304:2000
,
Safe use of machinery.
A technical construction file for this machinery is retained at the above address.
Signed:
............................................
Date:
...........................................
Name
K.F. Wingfield.
Position
Service Manager
Signing on behalf of the manufacturer.
To Next Page
Loading...