Eurocode Digi50 Controller V1.03 04/07/2005 Page - 30 -
RECOMMENDED SPARES LIST
Covering:-
EUROCODE 150 / 180 / 300
MECHANICAL
STOCK REF
1. Spring Set (Eurocode 150) SPR620216
or
Spring Set (Eurocode 180) SPR620215
or
Spring Set (Eurocode 300) SPR620217
2. Drive Belt (Eurocode 150) DRI110022
or
Drive Belt (Eurocode 180) DRI620048
or
Drive Belt (Eurocode 300) DRI620049
3. Drive Roller Assembly DRI620204
4. Fork End Roller Assembly FOR620208
5. Brake Strap (Eurocode 150/180) BRA620038
or
Brake Strap (Eurocode 300) BRA620051
6. Grey Self Adhesive Print Base SABASE
300 x 450mm sheet
or
7. White Silicone Rubber Print Base SRBASE
300 x 300 x 3mm thick sheet
Digi50 Controller
ELECTRICAL
STOCK REF
8. Cartridge Heater (240v) HEA501506
9. Thermistor Probe THE500502
10. Microswitch for Door SWI395011
11. Digi50 plug in Card (240v) CPC293502
12. Digi50 plug in Card (110v) CPC293503
13. Pack of Mains Fuses (5) 2A Anti-Surge FUS503512
14. Pack of Thermistor Fuses (10) 63mA Quick Blow FUS503511
15. Solenoid Valve without fittings VAL510524
Note!
The stock reference for the Digi50 plug-in control card listed above, (item 11 or 12) ensure
you have selected the correct voltage required. Other variations may be available. If in doubt,
please advise the serial number of your existing unit to our sales office.
This list covers machines supplied after 28 June 2005 for the first two years of operation
only.
To Next Page
Loading...