Opengear Operations Manager 2200 - Log In to the Operations Manager

4. LOG IN
Browse to 192.168.0.1 (subnet mask 255.255.255.0) with a computer
on the same LAN as the console server.*
NOTE: The device has a self-signed SSL certicate. Untrusted
connection errors appear. Click through the errors to the login page.
Log in with username root and password default. Click Submit.
The ACCESS > Serial Ports page appears with a list of connected serial
devices and links to a Web Terminal or SSH connection for each.
*If your computer is not on the same LAN, you can use the arping command to set the IP
address.