Need help?Do you have a question about the Opengear OM1208-8E and is the answer not in the manual?
Safety precautions for installing and operating the Operations Manager.
Compliance statement and conditions for FCC rules.
Details on power supplies for OM2200 and OM1200 units.
Information on NET1 and NET2 network connections and SFP modules.
Procedures for rebooting and factory resetting the Operations Manager.
Default IP address, username, and password for initial login.
How to access the Command Line Interface (CLI) via SSH.
Steps to change the root user password for security.
Configuration of IPv4/IPv6 networks, static/DHCP, and interfaces.
How to access the web-based terminal and use bash shell commands.
Locating and accessing specific serial ports via Web Terminal or SSH.
Lists serial ports and allows selection and scheduling of Autodiscover.
Editing settings or disabling local RJ45 and USB serial consoles.
Configuration of IPv4/IPv6 networks, static/DHCP, and Ethernet media types.
Creating, editing, and deleting groups and users, and setting up remote authentication.
Creating and managing user groups with roles and permissions.
Changing firewall management settings and zone configurations.
Performing a factory reset to restore default settings.
General| Model | OM1208-8E |
|---|---|
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| MAC Address Table | 8K |
| Certifications | CE, FCC, RoHS |
| Type | Ethernet Switch |
| Ports | 8 |
| Serial Ports | 8 |
| Management | Web, CLI |
| Storage Temperature | -40 to 70 °C |
| Humidity | 5% to 90% RH (non-condensing) |
To Next Page
