METHOD : 2
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this
product. The Installation Guide is intended as assistance to reduce setup time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
by OPT7 Lighting will void product warranty.
STEP 3
positive wire of the DRL .
STEP 4
Connect the trigger wire (red) that is on
the control box to the DRL positive wire,
then connect the LED strip to test if it
works .
POSITIVE WIREPOSITIVE WIRE
POSITIVE WIREPOSITIVE WIRE
HOW TO DIAGNOSE THE CORRECT
POSITIVE WIRE OF DRL ?
First, please prepare a multimeter.
Next, press the “Lock/Unlock" button on the
the positive wire .
IMPORTANT
TM
To Previous Page
Loading...
