Optelec Clear View C User Manual

Optelec ClearView C
Page 8 English
2. Unpacking and installing
The ClearView C is shipped in one box and is already assembled. All you
have to do is unpack the ClearView C, plug the power cord into the unit and
plug the power cord into the power socket.
To power on the ClearView C, please take the following steps:
- Plug the power cord into the power socket;
- Press the On / Off button at the left side of the Electronic Box.
2.1. Switching the table setup
Compact setup Comfort setup
The ClearView C has two table setups: the Compact setup and the wide
Comfort setup. The Compact setup is the standard setup. If you would like to
have more space, for instance when doing craftwork or reading larger
documents, you can switch to the Comfort setup. Please refer to the
‘Instruction Sheet for switching the table setup’ for step-by-step pictures.

Optelec Clear View C Specifications

General

Brand	Optelec
Model	Clear View C
Category	Magnifiers
Language	English