System Schedule
This feature allows the receiver to automatically switch on and tune
to a pre-specified channel for a pre-set length of time. You can use
this feature to schedule recording if your receiver is connected to a
VCR or recorder or as reminders of certain programs. Up to 10
tasks can be scheduled.
1. In the Schedule pane, use the Up / Down key to select a task and
use Right / Left key to switch between Inactive and Active.
2. Press OK to enter the Detail pane.
3. Enter the following settings as required. Use the Up / Down key
to move between setting items, the Right / Left key to switch
between available selections and numeric keys to enter numeric
value.
Mode: You can repeat the task by setting the frequency as Once,
Daily or Weekly. Or you can select Stop to disable the task.
Start and End Time: Enter the start and end time that
automatically turns on and off the receiver.
Channel Type: Select TV or radio channel as required.
Channel No: Select the channel to be played at scheduled time.
4. When the setting is done, press MENU or EXIT to save the changes.
Game
This option includes 4 built-in mini games: Mine, Tetris, Gomoku,
Calendar.
Accessory
System Information
This option allows you to view the current system information.
2222
To Next Page
Loading...
Need help?
General
