12
TROUBLESHOOTING
Checking the Battery Life
Press 2nd
then press F1, the display should show [U 6.##] battery power level for 2
seconds and then go back to weighing mode
Internal Code Checking
Press 2nd
and the display will show [2nd], then press F3 to display the internal code,
only used in maintenance and debugging.
To exis press 2nd key and the display will show [2nd], then press F3 to go back to
weighing mode
Screen Display and Instructions
Error Reason Solution
Err6
Exceed zero range Check the crane load
U 628
Battery Power
uuuuu
Overload
nnnnn
Lower than the minimum value Reduce the weight
2nd
2nd mode, weit foe combination key
off
Power off
ACC
Accumulate
noACC
Cannot be accumulated
del
Clear the last accumulation value data
nodel
Cannot be cleared
ClEAr
Clear all the accumulation data
StorE
Save the display value data
LASt0
Check the weight serial number
CONTACT US
Please e-mail sales@optimascale.com for any sales related questions.
Please e-mail support@optimascale.com for any support related questions.
Don’t forget to visit our website at:
optimascale.com
To Previous Page
Loading...
