Maintenance
OPTIMUM
MASCHINEN - GERMANY
© 2010
GB
Page 44 Drilling-Milling machine BF 20 Vario ; BF 20 L Vario Version 3.1.4 9 / 03 / 2010
5.3 Repair
For any repair work, get assistance from an employee of the company Optimum Maschinen
Germany GmbH’s technical service or send us the drilling-milling machine.
If the repairs are carried out by qualified technical staff, they have to follow the indications given
in this manual.
The company Optimum Maschinen Germany GmbH does not take responsibility nor does it gua-
rantee against damage and operating anomalies resulting from failure to observe this operating
manual.
For repairs only use
faultless and suitable tools,
original spare parts or serial expressly authorised by the company Optimum Maschinen
Germany GmbH.
To Next Page
