What to do if my Optimum Drill has no data visible?
If no data is visible on your Optimum Drill, it could be due to no power supply or the battery voltage being less than 3V. First, try cleaning the battery contacts. If that doesn't work, replace the battery.
Why is the screen on my Optimum Drill not refreshing?
The screen on your Optimum Drill might not be refreshing because the operation mode "S" is active. Try disabling the operation mode "S". Also, a disturbance in the circuit could be the cause. To resolve this, remove the battery, wait 30 seconds, and then reinsert it.
How to fix a flashing display on my Optimum Drill?
A flashing display on your Optimum Drill indicates that the voltage is too low. You should change the battery.
Displays machine identification, serial number, and manufacturer details.
Lists precautions to take while the machine is running.
Describes essential safety features of the machine.
Details the function and use of the emergency stop.
Describes the cover for the drilling/milling head.
Explains the spindle protection and its adjustment.
Outlines checks for safety devices before operation.
Lists required PPE for safe operation.
Provides general safety advice for operators.
Details procedures for safe shutdown.
Identifies and explains the machine's controls and displays.
Detailed description of buttons, switches, and indicators on the panel.
Step-by-step guide to start the machine.
Procedure for safely stopping the machine.
Instructions on how to install cutting tools.
Crucial safety and operational steps for securing workpieces.
How to adjust the machine's gear stages for different speeds.
Guide to choosing appropriate spindle speeds for different operations.
Tables providing recommended cutting speeds for various materials.
Tables for speeds when using HSS tools for drilling.
Operation of the fine feed mechanism for precise movement.
Safety precautions specifically for maintenance tasks.
Details regular checks and lubrication schedules.
Guidance on when and how to perform repairs.
Details common malfunctions and their solutions.
To Next Page
General