Optimum OptiGrind GH 15T User Manual

Safety
Version 1.1.4 - 2022-09-23 7Originalbetriebsanleitung
GH 10T | GH 15T EN
GH10T_GH15T_GB_1.fm
operation in the standard mode must only be performed by the operator if it is indicated in
these instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of
respective standards and regulations the electrical specialist is able to perform works on the
electrical system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Specialist staff
Due to its professional training, knowledge and experience as well as his knowledge of relevant
regulations the specialist staff is able to perform the assigned tasks and to recognise and avoid
any possible dangers himself.
Instructed persons
Instructed persons were instructed by the operating company about the assigned tasks and any
possible risks in case of improper behaviour.
1.5.2 Authorized personnel
WARNING!
Inappropriate operation and maintenance of the drill bit grinder constitutes a danger for
the staff, objects and the environment.
Only authorized staff may operate the drill bit grinder !
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of the
of the operating
company,
 train the personnel,
 instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- accredited technical guidelines,
 check personnel‘s state of knowledge,
 document the trainings/instructions,
 require personnel to confirm participation in training/instructions by means of a signature,
 check whether the personnel is working safety- and risk-conscious and observe the
operating instructions.
The operator must
Obligations of the
operator
 have obtained a training regarding the handling of the drill bit grinder,
 know the function and mode of action,
 before taking the machine in operation
- have read and understood the operating instructions,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
For work on the following parts there are additional requirements:
 Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
 Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order.
 Disconnect all poles.
 Secure against switching on.

Optimum OptiGrind GH 15T Specifications

General

Brand	Optimum
Model	OptiGrind GH 15T
Category	Grinder
Language	English