EasyManua.ls Logo

Optimus 12-1978 - INSTALLATION; SUPPLIED HARDWARE; CHOOSING A MOUNTING LOCATION

Optimus 12-1978
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
INSTALLATION
SUPPLIED HARDWARE
The following items are supplied with the equalizer. Be sure you locate these items
before you throw away the packing materials.
Left Bracket (1)
Right Bracket (1)
Short Machine Screws (4)
Small Flat Washers (7)
Large Lock Washer (1)
Large Flat Washer (1)
Small Lock Washers (7)
Small Sheet Metal Screws (2)
Large Sheet Metal Screw (1)
Mounting Strap (1)
Long Machine Screw (1)
CHOOSING A
MOUNTING LOCATION
Choose a mounting location that:
Is as close as possible to your
vehicle’s autosound system
Does not interfere with the vehi-
cle’s operation
Is not directly in front of a heating
vent
Lets you drill mounting holes with-
out damaging other vehicle com-
ponents
12-1978.fm Page 4 Tuesday, July 13, 1999 10:31 AM