17
Checking/Changing the
Programmed Sequence
Press
STOP
to cancel the current
function. Press
MEMORY CHECK
(
CHECK
on the CD changer).
The CD
changer displays the programmed se-
quence’s first selection. Each time you
press
MEMORY CHECK
, the CD
changer displays the next pro-
grammed selection.
To change a selection, repeatedly
press
MEMORY CHECK
until the CD
changer displays the disc number and
track number you want to change. En-
ter the desired disc number and/or
track number, then press
MEMORY
.
Adding to the Programmed
Sequence
You can add individual tracks or entire
CDs to the end of a programmed se-
quence up to a total of 32 tracks.
1. Repeatedly press
STOP
until
0
M
00
S
appears. This cancels the
current function.
2. Enter the desired disc number
and/or track number, then press
MEMORY
. The CD changer adds
the selection to the end of the pro-
grammed sequence.
Erasing a Programmed
Sequence
To erase the programmed sequence
from memory, press
STOP
then
CLEAR
.
PROGRAM
turns off. The se-
quence is also erased when you turn
off the CD changer.
illustration
illustration
42-5072.fm Page 17 Thursday, August 12, 1999 10:55 AM
To Next Page
Loading...
