Optimus CD-8400 - Basic Operation; Checking the Time Remaining and Elapsed on a CD

10
Basic Operation
C
hecking the Time Remaining
a
nd Elapsed on a CD
The display normally shows the current CD and track numbers, and the current
track’s elapsed play time.
Press
TIME
on the remote control once during play to display the current track’s
remaining time. Press
TIME
again to display the current CD’s remaining time.
Press
TIME
again to display the current CD’s total elapsed time.
During programmed play, pressing
TIME
twice displays the total programmed
time and the number of the programmed track playing (see “Programming a
Sequence” on Page 14). During best selection play, pressing
TIME
twice dis-
plays the number of tracks stored in the best selection memory (see “Storing
Your Best Tracks” on Page 12).
Notes:
• The CD changer does not display the current CD’s total remaining time
during programmed, random, or best selection play.
• The CD changer might not display the remaining time for tracks num-
bered greater than 24 on a CD.